Dot Reflective Tape

Your Trustworthy Dot Reflective Tape Üretici tedarikçi

Your Reliable Dot Reflective Tape Supplier

Çoklu Türler | Özel Çizgiler ve Logolar

Dot Reflective Tape
  • Reflective tapes are one of the finest inventions of all time. They have seen massive adoption since their invention and have become an integral part of our daily life.
  • If you drive, you must have noticed reflective linings on the side or rear side of the trucks or other heavy-duty vehicles. These tapes are nothing but reflective tapes.
  • They are intended to inform users and other drivers on the road about the vehicle and its size in front of them. In most cases, the vehicle on which these tapes are used is a truck.
  • Other than trucks, a similar version of these tapes are also used for road signs and roundabouts to make it easier for users to identify them in the dark.
  • We at YGM have an excellent history of producing utilitarian Dot reflective tapes. As these tapes are of various types, we will help you explore more about them in the coming sections.

Dot Reflective Tape Features

Features of Dot Reflective Tape

A: Yansıtıcılık

Reflectivity is one of the key features of all the products made by YGM. Similarly, the Dot reflective tape also has ample reflectivity to ensure that it is visible from a distance.
The Dot reflective tape is primarily used for sticking at the back of the trucks. Therefore, it is made from high-intensity glass beads. The beads reflect maximum light to ensure that the front vehicle is visible to other drivers.

C:Stickiness

The colour of the tape highly affects its reflectivity. Therefore, one should consider it.
As far as YGM is concerned, we make Dot reflective tape in a combination of two colours.
Although there are various types of reflective sheeting that you can buy, you can get the Dot reflective tape in one colour combination, and that is Red and White.
These colours are the most widely used colours on trucks and trailers.

E:Service Life

As the tape is used on the back of the trucks, it has to face various harsh weather conditions. Therefore, it is made strong enough to last long for seven years.
Both the dot reflective tapes have a service life of 7 years.

B: Renk

The colour of the tape highly affects its reflectivity. Therefore, one should consider it.
As far as YGM is concerned, we make Dot reflective tape in a combination of two colours.
Although there are various types of reflective sheeting that you can buy, you can get the Dot reflective tape in one colour combination, and that is Red and White.
These colours are the most widely used colours on trucks and trailers.

D: Özelleştirilebilirlik

The ability to customise the size and pattern of the tape is counted under customisability.
At YGM, we customise the tapes as per user preference. We can provide you with the Dot reflective tape in various sizes and patterns.
Our cutting process is backed by laser cutting machines.

F: Uygulanabilirlik

How to apply the tape is a big question as there are various ways like sew-on, hot press, etc. However, the Dot reflective tape has a pressure-sensitive adhesive.
Once pressed under ample pressure, it sticks firmly to the surface and performs without failing. Therefore, it is easy for you to stick it on the trucks and trailers.

Why choose YGM Dot Reflective Tape?

Dot Reflective Tape Category

1.Dot Reflective Tape

Dot Reflective Tape

Adhesive Type: PSA(Pressure-sensitive adhesive)
Renk: Kırmızı ve beyaz
Feasible Operating Temperature: 5-30℃
Servis Ömrü: 7 yıl
Specifications: 20cm+20cm/pcs, 15cm+15cm/pcs, 6In+6In/pcs, 7In+11In/pcs, 5cm*45.7m/roll

2.YGM Red White Reflective Tape

YGM Red White Reflective Tape

Adhesive Type: PSA(Pressure-sensitive adhesive)
Renk: Kırmızı ve beyaz
Feasible Operating Temperature: 5-30℃
Servis Ömrü: 7 yıl
Certificate: CCC certification
Specifications: 20cm+20cm/pcs, 15cm+15cm/pcs, 6In+6In/pcs, 7In+11In/pcs, 5cm*45.7m/roll

Dot Reflective Tape: Eksiksiz Satın Alma Rehberi

İçindekiler

Do I need Dot reflective tape on my trailer?

Yes, you definitely need to put the Dot reflective tape on your trailer. The sole motive of the tape is to enhance visibility. It helps other drivers see the truck or trailer and also helps them estimate the size of it.

Where do you put Dot reflective tape?

To meet the Dot C2 regulations, it is crucial for you to put the Dot reflective tape in a certain way on your truck. You need to put the red and white tape on the rear and sides of the trailer or truck. Other than this, the white tape should also be applied upper ear corners of the trailer or truck.

What are the applications of Dot reflective tape?

The basic application of Dot reflective tape is in enhancing the visibility of the thing it is applied on in the dark. For instance, it is used on the back of the truck or trailer to let other drivers know its size and presence. Other than this, the Dot reflective tape is also used on roadside traffic and warning signs.

Application of Dot Reflective Tape
YGM Yansıtıcı Logo
lp_1_sağ

How do you use Dot reflective tape?

The use of Dot reflective tape has some necessary things to keep in mind, such as:

  1. You need to apply the red and white tape at the rear bottom of the truck or trailer.
  2. The tape should cover at least half of the total side length of the truck or trailer.
  3. The red and white tape should be on the top rear of the truck.
  4. These tapes should be along the entire bottom of the back and entire lower rear bar.

How do you remove Dot reflective tape?

The process to remove the tape is pretty easy. First, you need to take a sharp edge razor blade and try to pull out the edge of the marking tape. Change the blade if required, as the sharpest blade will do the job faster. Keep removing the marking by pulling it with minimum tension at an angle of 45 degrees. If the tape breaks in between, repeat the mentioned steps again.

How do you stick reflective tape?

The process to stick the Dot reflective tape is super easy. You just need to peel off the liner on the tape and apply it on a clean surface with some pressure. Give it some overlapped strokes, and after some time, the tape will be fully tucked to the surface.

What is the brightest Dot reflective tape?

Prismatic red and silver are the brightest Dot reflective tapes. However, prismatic fluorescent lime and yellow are also ideal for night visibility.

How much Dot reflective tape is required on a trailer?

The Dot reflective tape needs to be applied on the back and side of the trailer to meet Dot C2 regulations. Here is how much Dot reflective tape is required on the trailer:

  1. Arkada: End to end on the bottom of the back and on the lower rear bar.
  2. Taraf: At least on 50% of the side length of the trailer.
Requirements of Dot Reflective Tape

What types of Dot reflective tape does YGM offer?

The tapes offered by YGM can be divided based on colour. YGM offers two types of Dot reflective tapes in silver and red colour combinations.

Does YGM Manufacture Dot reflective tape? Can I order Dot reflective tape from YGM?

Yes, YGM is one of the major producers of Dot reflective tape in Asia. You can order any of the above-mentioned Dot reflective tapes from YGM. We cater for our loyal customers all around the globe with the best quality products.

What is the size of the YGM Dot reflective tape?

As we have a global customer base, we try our best to deliver top-end services to our customers. As far as the Dot reflective tape is concerned, we provide them with 5cm tapes. We are also open to any custom tape sizes if required. The thing that you need to do here is send us your requirements, and we will make the custom sizes tapes as per your needs.

Can I order a custom-size Dot reflective tape? Are the specifications customisable too?

YGM understands that the requirements can vary from customer to customer. Therefore, we offer our customers the liberty to order custom size dot reflective tapes. You can let us know your requirements and we will manufacture the tapes as per your preference. The size, as well as pattern both, are customisable as per the customer’s need.

How long does YGM take to produce & deliver my order of Dot reflective tape?

The time taken by YGM to deliver your order depends on two things, namely, the type of order and its availability. For instance, if your order is of standard products, it will take around 25-30 days for YGM to deliver it anywhere across the globe. On the other hand, if it is a custom order, it may take more time. If you order it before time, you can get it on time.

Does YGM offer free samples for Dot reflective tape?

Yes, YGM will surely provide you with samples of products for free. However, for that, you need to assure us that you will be placing a wholesale order. Other than that, you have to pay the shipping or freight charges. You can let us know your sample requirements, and we will deliver them to you.

Are YGM products always available & in stock? Do I need to pre-order & await new stock for months after ordering?

Yes, almost all of our standard products are always in stock. You can confirm it from our sales department to be sure. In contrast, if you are ordering a custom product, we do our best to get it to you faster. And no, you won’t have to wait for months to get your order.

What are the various certification standards when it comes to Dot reflective tape? How are they updated?

The certification standards that YGM red white reflective tape follows are:

  1. CCC certification: It stands for the China Compulsory Certificate mark, which is required for products that are sold, used, and imported in China.

How do I ensure the Dot reflective tape remains at its best quality?

Dot reflective tape is self-adhesive. As it’s not made from a reflective fabric, you don’t need to clean it with water every once in a while. Instead, you can just dust off or pat dry with a soft cloth to keep it clean from grime. Moreover, it is necessary for you to apply it properly. As it has a pressure-sensitive adhesive, you need to apply ample pressure to apply it properly.

What packaging options do you offer at YGM for Dot reflective tape?

YGM offers the following packaging options for Dot reflective tape:

  1. Ön yüz gösterisi > Plastik poşet ambalajı > İç ambalaj > Dış ambalaj
Packing of Dot Reflective Tape

What is the net production capacity of YGM for Dot reflective tape?

As we have customers around the world, YGM has a production capacity of 5 million square meters per month which is massive.

Ok
cnygm-index2021_60

Bize ulaşın

Ygm
yakın bağlantı
En gidin